基于SD流率基本入树的部队装备管理信息化建设研究

部队装备管理信息化建设是当前我军装备管理领域正在着力进行的一项复杂系统工程。深入探索建设规律,对于指导建设实践、提高建设质量具有重要意义。在对部队装备管理信息化建设进行系统分析的基础上,利用系统动力学（SD）流率基本人树建模方法构建了其流率基本人树模型,并利用vensim仿真软件对其进行了实例仿真。研究表明,运用系统动力学方法可以实现对部队装备管理信息化建设问题的研究由定性向定量转变,深化规律探索,同时研究结果也可为建设决策提供科学的定量理论支持。     

一种直扩信号伪码速率的快速检测方法

为了解决快速提取直接序列扩频通信信号伪码码速率的难题,详细介绍了一种用延时相乘法实现快速提取直扩信号伪码速率的原理和实现方法。理论分析和计算机模拟表明,该方法在较低的输入信噪比条件下具有较高的识别率。     

某高性能激光测距机总体设计与分析

针对某型激光测距机的高性能要求,在总体设计中采用多发散角分档可调、恒比定时鉴别和厘米级高分辨率计数器等项技术和措施,对激光测距作用距离、回波率以及发散角选择进行详细计算,计算结果表明总体组成能满足指标要求。     

基于编码矩阵识别的高速空时分组码技术

正交空时分组码和准正交空时分组码的编码速率≤1,为使空时分组码能够应用在高速传输的场合,本文提出了一种基于编码矩阵识别的高速空时分组码设计方法。该方法通过在发送端发送不同的编码矩阵表示不同的附加信息,能够实现大于1编码速率,仿真分析结果表明,在高信噪比条件下该方法使编码速率达到了2.5,并具有良好的有效吞吐容量,特别适合无线高速数据传输。     

一种基于两级均衡的超Nyquist码元速率接收方案

1975年MAZO提出超Nyquist码元速率(FTN)理论,通过理论推导证明,信号在加性高斯白噪声信道下,以超过Nyquist码元速率25%以内的速率进行传输,误码性能可以不下降。但MAZO以及至今都没人能完成FTN的接收,因为当信号以超Nyquist码元速率进行传输所引起的码间串扰长度无限长,若要完全消除码间串扰,使用最大似然检测(MLSE)方法,其复杂度无穷大,是不可实现的。基于MMSE均衡和WCE均衡级联的两级均衡已证明在长码间串扰信道下其误码性能接近于MLSE。文章将两级均衡运用于FTN接收,仿真证明在加性高斯白噪声信道下,信号以超过Nyquist码元速率25%以内的速率进行传输,误码性能不下降。成功实现FTN的接收,验证了MAZO的理论。     

Recent advances in catalytic combustion of AP-based composite solid propellants

Composite solid propellants (CSPs) have widely been used as main energy source for propelling the rockets in both space and military applications. Internal ballistic parameters of rockets like characteristic exhaust velocity, specific impulse, thrust, burning rate etc., are measured to assess and control the performance of rocket motors. The burn rate of solid propellants has been considered as most vital parameter for design of solid rocket motors to meet specific mission requirements. The burning rate of solid propellants can be tailored by using different constituents, extent of oxidizer loading and its particle size and more commonly by incorporating suitable combustion catalysts. Various metal oxides (MOs), complexes, metal powders and metal alloys have shown positive catalytic behaviour during the com-bustion of CSPs. These are usually solid-state catalysts that play multiple roles in combustion of CSPs such as reduction in activation energy, enhancement of rate of reaction, modification of sequences in reaction-phase, influence on condensed-phase combustion and participation in combustion process in gas-phase reactions. The application of nanoscale catalysts in CSPs has increased considerably in recent past due to their superior catalytic properties as compared to their bulk-sized counterparts. A large surface-to-volume ratio and quantum size effect of nanocatalysts are considered to be plausible reasons for improving the combustion characteristics of propellants. Several efforts have been made to produce nanoscale combustion catalysts for advanced propellant formulations to improve their energetics. The work done so far is largely scattered. In this review, an effort has been made to introduce various combustion catalysts having at least a metallic entity. Recent developments of nanoscale combustion catalysts with their specific merits are discussed. The combustion chemistry of a typical CSP is briefly discussed for providing a better understanding on role of combustion catalysts in burning rate enhancement. Available information on different types of combustion nanocatalysts is also presented with critical comments.     

主方差分析方法

该文提出一种对高维随机向量 X=( x1 ,x2 ,… ,xp)′p× 1 进行降维处理的实用方法 ,其基本思想是利用矩阵的扫描运算 ,构造 X的很少几个综合指标 (称为主方差变量 )以反映 X的统计特性。给出了该方法的理论依据和直观解释以及算法。特别指出 ,当变量 X多重相关性突出时 ,该文方法显著地优于主成分分析方法。     

对Reimer-Tiemann反应的改进

传统的Reimer-Tiemann反应产率不高(一般低于35%).通过改进反应条件,控制反应过程,使产率提高到60%,并对反应中的有关问题进行了讨论.     

一种基于机载SAR原始回波的多普勒参数估计方法

多普勒参数的估计精度直接影响机载合成孔径雷达系统(SAR)成像质量。根据平均后的方位谱来估计多普勒中心频率,通过计算子图像之间的位移值来估计多普勒调频斜率。为了消除在实际应用中各种干扰的影响,采用了对原始回波数据加窗的方法来提高对估计的准确性。该算法的估计结果可以用于补偿载机运动误差引入的相位误差,从而实现高分辨率成像。通过使用实验数据进行分析,验证了该方法的有效性。     

角速率火控系统计算延迟问题的研究

提出解决角速率火控系统计算延迟问题的两种方法,为深入研究角速率火控计算进行了新的探索。